Testing is the cornerstone of Champion ONE’s success. We test our optics at every major point along the production line. We audit our contract manufacturing facilities, and then perform advanced functional, platform, and network testing upon arrival to our US laboratories in Orange County, CA, and Cleveland, OH.

Testing performed in-house at Champion ONE includes

  • Compliance Verification for Distance
  • Wavelength
  • Traffic Density
  • Light
  • Optical 100 Mbps to 100 Gbps Ethernet testing, including 25GE & 50GE
  • Electrical 10/100/1000 Mbps Ethernet testing
  • Dual-port testing capabilities
  • Optical Lane BERT and CAUI-4/XLAUI Lane BERT
  • PCS Layer Testing with Skew generation/monitoring
  • Multi-stream testing up to 32 independent streams
  • IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, and MPLS-TP OAM support
  • RS-FEC support for SR4 and SR10 transceivers
  • Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB, EoE support
  • MAC flooding
  • RFC2544 and V-SAM (Y.1564) testing
  • IPv4 and IPv6 traffic generation
  • BERT and Throughput testing at Layer 2 and Layer 3
  • Smart Loopback mode for Layer 2 and Layer 3
  • One-Way-Delay latency measurement (GPS assisted)
  • Line rate packet capture with Wireshark™ decode
  • Error and Alarm Injection
  • 25G eCPRI
  • Dual-port testing capabilities
  • RS-FEC support
  • Multi-stream testing up to 32 independant streams
  • Throughput testing at Layer 2 and Layer 4
  • IPv4 and IPv6 support
  • Q in Q (VLAN stacking) and MPLS support
  • High accuracy One-Way-Delay latency measurement (GPS assisted)
  • Line rate packet capture
  • Storage Area Networks (SAN) testing for 1G, 2G, 4G, 8G, 10G, 16G and 32G interfaces
  • BERT and Throughput test
  • RFC2544: Throughput, latency, frame loss, back to back tests Layer 1 and layer 2 loopbacks
  • OTN Testing
  • OTN testing for OTU1, OTU2, OTU1e, OTU2e, OTU3 and OTU4
  • Complete multi-stage Mapping/Multiplexing
  • Advanced multi-step Map/Mux with SDH/SONET/PDH/DSn test payloads*
  • Ethernet over OTN (EoOTN)
  • ODUflex into ODU2, ODU3 and ODU4 with Bulk payload
  • Service Disruption Time (SDT)
  • Tandem Connection Monitoring
  • Overhead monitoring and generation
  • Terminate, Payload Through and Line Through test modes
  • Per-lane optical power and frequency measurements
  • External clock reference interface
  • Histogram Analysis
  • Available as Line Rate or mapped into OTN payloads
  • STM-0 to STM-64 and STS-1/OC-1 to OC-192
  • Advanced multi-step Map/Mux with PDH/DSn test payloads

Our Test Bed

Our robust lab facilities are among the deepest in the industry. We own and test our optics in the switches, servers, routers, and other equipment from the following manufacturers

Mark processing quality assurance checks on optics at Champion ONE
  • 3com
  • Adtran
  • Adva/Overture
  • Alcatel/Nokia
  • Arista
  • Avaya/Nortel
  • Boardcom
  • Brocade
  • Calix
  • Calix
  • Ciena/Cyan
  • Cisco
  • Dell/Force10
  • Edgecore
  • EMC
  • Enterasys
  • Extreme
  • H3C
  • HP/HPE
  • Infinera
  • Intel
  • Juniper/BTI
  • Mellanox
  • Palo Alto
  • Telco Systems

Contact Us

216.342.3779

Address 7575 E. Pleasant Valley Rd Suite 100
Cleveland, OH 44131