M-F 8am - 5pm ET


10G Open Network Switches

Champion ONE's 52 and 54 port 10G Ethernet switches provide full line-rate switching at Layer 2 or Layer 3 across 48 or 10GbE ports and 4 or 40GbE uplinks. Port grouping allows the user to group 4x10GbE ports into one 40G port at the physical layer for maximum bandwidth utilization (and 300m reach over multi-mode fiber). All of this comes in a compact 1RU enclosure with redundant, hot-swappable AC or DC power supplies (see below for more information) and supports hot/cold aisle configurations with port-to-power or power-to-port airflow options.

These switches meet the high performance, availability, and network-scaling requirements of service providers or data centers, and can be deployed either as a Top-of-Rack switches or parts of a distributed spine.

Champion ONE’s 10G switch comes loaded with Open Network Install Environment (ONIE) software installer, and can be bundled with Broadcom ICOS software or Linux®-based Cumulus® software.


Key Features and Benefits:

Cost-effective, bare-metal switch infrastructure for data center fabric.

Supports hot/cold aisle with port-to-power and power-to-port airflow SKUs.

Hot-swappable, load-sharing, redundant AC PSUs or -48VDC PSUs; or 12VDC power input

Management: Ethernet and console RJ-45 ports; USB storage port.

Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible independent SwitchOS software

Compatible with Cumulus®Linux® r2.0.1 and later SwitchOS software from Cumulus Networks™

All ports on front


Data sheet
10G Ethernet 48 Port plus 6 Uplink Ports Open Network Switch

Data sheet
Networking Switch Software

Data sheet
Open Networking Switch Support Plan

Data sheet
Open Networking Switch Support Plan Flowchart